A new issue of this journal has just been published. To see abstracts of the papers it contains (with links through to the full papers) click here:
Recently published papers:Gordon F. Kirkbright Bursary Award, 2012
Publication year: 2011
Source: Spectrochimica Acta Part B: Atomic Spectroscopy, Volume 66, Issue 6, June 2011, Page 489
[No author name available]
Source: Spectrochimica Acta Part B: Atomic Spectroscopy, Volume 66, Issue 6, June 2011, Page 489
[No author name available]
Determination of trace impurities in aluminum nitride by direct solid sampling graphite furnace atomic absorption spectrometry
Publication year: 2011
Source: Spectrochimica Acta Part B: Atomic Spectroscopy, In Press, Accepted Manuscript, Available online 13 July 2011
Julio Cezar Paz, de Mattos , Luiz Frederico, Rodrigues , Érico Marlon, de Moraes Flores , Viliam, Krivan
The trace impurities Cr, Cu, Fe, K, Mn, Sb and Zn were determined in powdered aluminum nitride by direct solid sampling graphite furnace atomic absorption spectrometry using a ZEEnit 60 atomic absorption spectrometer. This spectrometer features inverse Zeeman-effect background correction and a variable magnetic field enabling measurements in two sensitivity modes over a concentration range of three orders of magnitude. The measurement sensitivity can be adjusted to the analyte concentration in the sample. The use of chemical modifiers was not necessary. Calibration was carried out by means of calibration curves obtained with aqueous standard solutions. Accuracy was checked mainly by...
Source: Spectrochimica Acta Part B: Atomic Spectroscopy, In Press, Accepted Manuscript, Available online 13 July 2011
Julio Cezar Paz, de Mattos , Luiz Frederico, Rodrigues , Érico Marlon, de Moraes Flores , Viliam, Krivan
The trace impurities Cr, Cu, Fe, K, Mn, Sb and Zn were determined in powdered aluminum nitride by direct solid sampling graphite furnace atomic absorption spectrometry using a ZEEnit 60 atomic absorption spectrometer. This spectrometer features inverse Zeeman-effect background correction and a variable magnetic field enabling measurements in two sensitivity modes over a concentration range of three orders of magnitude. The measurement sensitivity can be adjusted to the analyte concentration in the sample. The use of chemical modifiers was not necessary. Calibration was carried out by means of calibration curves obtained with aqueous standard solutions. Accuracy was checked mainly by...
No comments:
Post a Comment