A new issue of this journal has just been published. To see abstracts of the papers it contains (with links through to the full papers) click here:
Selected papers from the latest issue:
Assays for aptamer-based platforms
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Marimuthu Citartan, Subash C.B. Gopinath, Junji Tominaga, Soo-Choon Tan, Thean-Hock Tang
Aptamers are single stranded DNA or RNA oligonucleotides that have high affinity and specificity towards a wide range of target molecules. Aptamers have low molecular weight, amenable to chemical modifications and exhibit stability undeterred by repetitive denaturation and renaturation. Owing to these indispensable advantages, aptamers have been implemented as molecular recognition element as alternative to antibodies in various assays for diagnostics. By amalgamating with a number of methods that can provide information on the aptamer–target complex formation, aptamers have become the elemental tool for numerous biosensor developments. In this review, administration of aptamers in applications involving assays of fluorescence, electrochemistry, nano-label and nano-constructs are discussed. Although detection strategies are different for various aptamer-based assays, the core of the design strategies is similar towards reporting the presence of specific target binding to the corresponding aptamers. It is prognosticated that aptamers will find even broader applications with the development of new methods of transducing aptamer target binding.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Marimuthu Citartan, Subash C.B. Gopinath, Junji Tominaga, Soo-Choon Tan, Thean-Hock Tang
Aptamers are single stranded DNA or RNA oligonucleotides that have high affinity and specificity towards a wide range of target molecules. Aptamers have low molecular weight, amenable to chemical modifications and exhibit stability undeterred by repetitive denaturation and renaturation. Owing to these indispensable advantages, aptamers have been implemented as molecular recognition element as alternative to antibodies in various assays for diagnostics. By amalgamating with a number of methods that can provide information on the aptamer–target complex formation, aptamers have become the elemental tool for numerous biosensor developments. In this review, administration of aptamers in applications involving assays of fluorescence, electrochemistry, nano-label and nano-constructs are discussed. Although detection strategies are different for various aptamer-based assays, the core of the design strategies is similar towards reporting the presence of specific target binding to the corresponding aptamers. It is prognosticated that aptamers will find even broader applications with the development of new methods of transducing aptamer target binding.
Recent trends in antibody based sensors
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Timothy R.J. Holford, Frank Davis, Séamus P.J. Higson
This review details recent advances in the fields of immunosensors and closely related immunoassays in the past decade, together with a discussion of possible future trends. Immunosensors can be classified by the way in which they transduce the signal produced upon the formation of an antibody antigen complex. Recent advancements to these methods of detection and transduction are discussed in detail, with particular focus on electrochemical, optical, piezoelectric and magnetic based sensors. The varying applications of these sensors are also discussed. Some of the most significant advances include development of immunosensors for the continuous monitoring of analytes, point of care (PoC) devices, with lower unit costs, automation, reusability and ease of use. Immunosensor technology has advanced at a prolific rate since its conception and has grown into a diverse area of ongoing research.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Timothy R.J. Holford, Frank Davis, Séamus P.J. Higson
This review details recent advances in the fields of immunosensors and closely related immunoassays in the past decade, together with a discussion of possible future trends. Immunosensors can be classified by the way in which they transduce the signal produced upon the formation of an antibody antigen complex. Recent advancements to these methods of detection and transduction are discussed in detail, with particular focus on electrochemical, optical, piezoelectric and magnetic based sensors. The varying applications of these sensors are also discussed. Some of the most significant advances include development of immunosensors for the continuous monitoring of analytes, point of care (PoC) devices, with lower unit costs, automation, reusability and ease of use. Immunosensor technology has advanced at a prolific rate since its conception and has grown into a diverse area of ongoing research.
4-(Dimethylamino)butyric acid@PtNPs as enhancer for solid-state electrochemiluminescence aptasensor based on target-induced strand displacement
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Xianxue Gan, Ruo Yuan, Yaqin Chai, Yali Yuan, Li Mao, Yaling Cao, Yuhong Liao
A solid-state electrochemiluminescence (ECL) aptasensor based on target-induced aptamer displacement for highly sensitive detection of thrombin was developed successfully using 4-(dimethylamino)butyric acid (DMBA)@PtNPs labeling as enhancer. Such a special aptasensor included three main parts: ECL substrate, ECL intensity amplification and target-induced aptamer displacement. The ECL substrate was made by modifying the complex of Pt nanoparticles (PtNPs) and tris(2,2-bipyridyl) ruthenium (II) (Ru(bpy)3 2+) (Ru–PtNPs) onto nafion@multi-walled carbon nanotubes (nafion@MWCNTs) modified electrode surface. A complementary thrombin aptamer labeled by DMBA@PtNPs (Aptamer II) acted as the ECL intensity amplification. The thrombin aptamer (TBA) was applied to hybridize with the labeled complementary thrombin aptamer, yielding a duplex complex of TBA–Aptamer II on the electrode surface. The introduction of thrombin triggered the displacement of Aptamer II from the self-assembled duplex into the solution and the association of inert protein thrombin on the electrode surface, decreasing the amount of DMBA@PtNPs and increasing the electron transfer resistance of the aptasensor and thus resulting large decrease in ECL signal. With the synergistic amplification of DMBA and PtNPs to Ru(bpy)3 2+ ECL, the aptasensor showed an enlarged ECL intensity change before and after the detection of thrombin. As a result, the change of ECL intensity has a direct relationship with the logarithm of thrombin concentration in the range of 0.001–30nM. The detection limit of the proposed aptasensor is 0.4pM. Thus, the approach is expected to open new opportunities for protein diagnostics in clinical as well as bioanalysis in general.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Xianxue Gan, Ruo Yuan, Yaqin Chai, Yali Yuan, Li Mao, Yaling Cao, Yuhong Liao
A solid-state electrochemiluminescence (ECL) aptasensor based on target-induced aptamer displacement for highly sensitive detection of thrombin was developed successfully using 4-(dimethylamino)butyric acid (DMBA)@PtNPs labeling as enhancer. Such a special aptasensor included three main parts: ECL substrate, ECL intensity amplification and target-induced aptamer displacement. The ECL substrate was made by modifying the complex of Pt nanoparticles (PtNPs) and tris(2,2-bipyridyl) ruthenium (II) (Ru(bpy)3 2+) (Ru–PtNPs) onto nafion@multi-walled carbon nanotubes (nafion@MWCNTs) modified electrode surface. A complementary thrombin aptamer labeled by DMBA@PtNPs (Aptamer II) acted as the ECL intensity amplification. The thrombin aptamer (TBA) was applied to hybridize with the labeled complementary thrombin aptamer, yielding a duplex complex of TBA–Aptamer II on the electrode surface. The introduction of thrombin triggered the displacement of Aptamer II from the self-assembled duplex into the solution and the association of inert protein thrombin on the electrode surface, decreasing the amount of DMBA@PtNPs and increasing the electron transfer resistance of the aptasensor and thus resulting large decrease in ECL signal. With the synergistic amplification of DMBA and PtNPs to Ru(bpy)3 2+ ECL, the aptasensor showed an enlarged ECL intensity change before and after the detection of thrombin. As a result, the change of ECL intensity has a direct relationship with the logarithm of thrombin concentration in the range of 0.001–30nM. The detection limit of the proposed aptasensor is 0.4pM. Thus, the approach is expected to open new opportunities for protein diagnostics in clinical as well as bioanalysis in general.
Electrochemical detection of catecholamine release using planar iridium oxide electrodes in nanoliter microfluidic cell culture volumes
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Igor A. Ges, Kevin P.M. Currie, Franz Baudenbacher
Release of neurotransmitters and hormones by calcium regulated exocytosis is a fundamental cellular/molecular process that is disrupted in a variety of psychiatric, neurological, and endocrine disorders. Therefore, this area represents a relevant target for drug and therapeutic development, efforts that will be aided by novel analytical tools and devices that provide mechanistically rich data with increased throughput. Toward this goal, we have electrochemically deposited iridium oxide (IrOx) films onto planar thin film platinum electrodes (20μm×300μm) and utilized these for quantitative detection of catecholamine release from adrenal chromaffin cells trapped in a microfluidic network. The IrOx electrodes show a linear response to norepinephrine in the range of 0–400μM, with a sensitivity of 23.1±0.5mA/Mmm2. The sensitivity of the IrOx electrodes does not change in the presence of ascorbic acid, a substance commonly found in biological samples. A replica molded polydimethylsiloxane (PDMS) microfluidic device with nanoliter sensing volumes was aligned and sealed to a glass substrate with the sensing electrodes. Small populations of chromaffin cells were trapped in the microfluidic device and stimulated by rapid perfusion with high potassium (50mM) containing Tyrode's solution at a flow rate of 1nL/s. Stimulation of the cells produced a rapid increase in current due to oxidation of the released catecholamines, with an estimated maximum concentration in the cell culture volume of ∼52μM. Thus, we demonstrate the utility of an integrated microfluidic network with IrOx electrodes for real-time quantitative detection of catecholamines released from small populations of chromaffin cells.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Igor A. Ges, Kevin P.M. Currie, Franz Baudenbacher
Release of neurotransmitters and hormones by calcium regulated exocytosis is a fundamental cellular/molecular process that is disrupted in a variety of psychiatric, neurological, and endocrine disorders. Therefore, this area represents a relevant target for drug and therapeutic development, efforts that will be aided by novel analytical tools and devices that provide mechanistically rich data with increased throughput. Toward this goal, we have electrochemically deposited iridium oxide (IrOx) films onto planar thin film platinum electrodes (20μm×300μm) and utilized these for quantitative detection of catecholamine release from adrenal chromaffin cells trapped in a microfluidic network. The IrOx electrodes show a linear response to norepinephrine in the range of 0–400μM, with a sensitivity of 23.1±0.5mA/Mmm2. The sensitivity of the IrOx electrodes does not change in the presence of ascorbic acid, a substance commonly found in biological samples. A replica molded polydimethylsiloxane (PDMS) microfluidic device with nanoliter sensing volumes was aligned and sealed to a glass substrate with the sensing electrodes. Small populations of chromaffin cells were trapped in the microfluidic device and stimulated by rapid perfusion with high potassium (50mM) containing Tyrode's solution at a flow rate of 1nL/s. Stimulation of the cells produced a rapid increase in current due to oxidation of the released catecholamines, with an estimated maximum concentration in the cell culture volume of ∼52μM. Thus, we demonstrate the utility of an integrated microfluidic network with IrOx electrodes for real-time quantitative detection of catecholamines released from small populations of chromaffin cells.
Visual detection of single-base mismatches in DNA using hairpin oligonucleotide with double-target DNA binding sequences and gold nanoparticles
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Yuqing He, Xibao Zhang, Sanquan Zhang, Mak Ka Long Kris, Fong Chi Man, Abdel-Nasser Kawde, Guodong Liu
We describe a hairpin oligonucleotide (HO) with double-target DNA binding sequences in the loop and 11-base in the stem for visual detection of single-base mismatches (SBM) in DNA with highly specificity. The thiol-modified HO was immobilized on gold nanoparticle (Au-NP) surface through a self-assembling process. The strategy of detecting SBM depends on the unique molecular recognition properties of HO to the perfect-matched DNA and SBM to generate different quantities of duplex DNA on the Au-NP surface, which are captured on the test zone of lateral flow test strip via the DNA hybridization reaction between the duplex DNA and preimmobilized DNA probe. Accumulation of Au-NPs produces the characteristic red bands, enabling visual detection of SBM. It was found that the ability of HO to differentiate perfect-matched DNA and SBM was increased dramatically by incorporating double-target DNA binding sequences in the loop of HO. The signal ratio between perfect-matched DNA and SBM was up to 28, which is much higher than that of conventional HO or molecular beacon. The approach was applied to detect the mutation sites, Arg142Cys and Gly529Ile, of transglutaminase 1 gene in autosomal recessive congenital ichthyosis. The results presented here show that the new HO is a potential molecular recognition probe for the future development of nucleic acid-based biosensors and bioassays. The approach can be used for point-of-care diagnosis of genetic diseases and detecting infectious agents or warning against bio-warfare agents.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Yuqing He, Xibao Zhang, Sanquan Zhang, Mak Ka Long Kris, Fong Chi Man, Abdel-Nasser Kawde, Guodong Liu
We describe a hairpin oligonucleotide (HO) with double-target DNA binding sequences in the loop and 11-base in the stem for visual detection of single-base mismatches (SBM) in DNA with highly specificity. The thiol-modified HO was immobilized on gold nanoparticle (Au-NP) surface through a self-assembling process. The strategy of detecting SBM depends on the unique molecular recognition properties of HO to the perfect-matched DNA and SBM to generate different quantities of duplex DNA on the Au-NP surface, which are captured on the test zone of lateral flow test strip via the DNA hybridization reaction between the duplex DNA and preimmobilized DNA probe. Accumulation of Au-NPs produces the characteristic red bands, enabling visual detection of SBM. It was found that the ability of HO to differentiate perfect-matched DNA and SBM was increased dramatically by incorporating double-target DNA binding sequences in the loop of HO. The signal ratio between perfect-matched DNA and SBM was up to 28, which is much higher than that of conventional HO or molecular beacon. The approach was applied to detect the mutation sites, Arg142Cys and Gly529Ile, of transglutaminase 1 gene in autosomal recessive congenital ichthyosis. The results presented here show that the new HO is a potential molecular recognition probe for the future development of nucleic acid-based biosensors and bioassays. The approach can be used for point-of-care diagnosis of genetic diseases and detecting infectious agents or warning against bio-warfare agents.
Simultaneous and rapid detection of six different mycotoxins using an immunochip
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Ying Wang, Nan Liu, Baoan Ning, Ming Liu, Zhiqiang Lv, Zhiyong Sun, Yuan Peng, Cuicui Chen, Junwen Li, Zhixian Gao
Mycotoxins are highly toxic contaminants in food, animal feed, and commodities. The study has developed an immunochip for quantifying the concentrations of six mycotoxins: aflatoxin B1, aflatoxin M1, deoxynivalenol, ochratoxin A, T-2 toxin, and zearalenone, which were added to drinking water. The complete antigens (Ags) of the mycotoxins were contact printed and immobilized onto agarose-modified glass slides with 12 physically isolated subarrays, based on the reaction of both diffusion and covalent bond. The optimal concentration of each antigen and antibody (Ab) was obtained using an Ag–Ab immunoassay. Based on the indirect competitive immunoassay for the simultaneous detection of six mycotoxins in one single chip, six standard curves with good logistic correlation (R 2 >0.97) were respectively plotted. The working ranges (0.04–1.69, 0.45–3.90, 20.20–69.23, 35.68–363.18, 0.11–1.81, and 0.08–7.47ng/mL, respectively) were calculated, as well as the median inhibitory concentrations (0.31±0.04, 1.49±0.21, 34.54±1.30, 134.06±11.75, 0.49±0.05, and 1.54±0.22ng/mL, respectively), when six mycotoxins were detected simultaneously. Finally, the recovery rates in drinking water generally ranged from 80% to 120% on the same chip, with an intra-assay coefficient of variation lower than 15%. We successfully established an immunochip for simultaneous detection of six mycotoxins within 4h, with advantages of using minimal samples and being visually semiquantitative with our naked eyes. In summary, the method could be developed on one single chip for detecting multiple contaminants in actual samples.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Ying Wang, Nan Liu, Baoan Ning, Ming Liu, Zhiqiang Lv, Zhiyong Sun, Yuan Peng, Cuicui Chen, Junwen Li, Zhixian Gao
Mycotoxins are highly toxic contaminants in food, animal feed, and commodities. The study has developed an immunochip for quantifying the concentrations of six mycotoxins: aflatoxin B1, aflatoxin M1, deoxynivalenol, ochratoxin A, T-2 toxin, and zearalenone, which were added to drinking water. The complete antigens (Ags) of the mycotoxins were contact printed and immobilized onto agarose-modified glass slides with 12 physically isolated subarrays, based on the reaction of both diffusion and covalent bond. The optimal concentration of each antigen and antibody (Ab) was obtained using an Ag–Ab immunoassay. Based on the indirect competitive immunoassay for the simultaneous detection of six mycotoxins in one single chip, six standard curves with good logistic correlation (R 2 >0.97) were respectively plotted. The working ranges (0.04–1.69, 0.45–3.90, 20.20–69.23, 35.68–363.18, 0.11–1.81, and 0.08–7.47ng/mL, respectively) were calculated, as well as the median inhibitory concentrations (0.31±0.04, 1.49±0.21, 34.54±1.30, 134.06±11.75, 0.49±0.05, and 1.54±0.22ng/mL, respectively), when six mycotoxins were detected simultaneously. Finally, the recovery rates in drinking water generally ranged from 80% to 120% on the same chip, with an intra-assay coefficient of variation lower than 15%. We successfully established an immunochip for simultaneous detection of six mycotoxins within 4h, with advantages of using minimal samples and being visually semiquantitative with our naked eyes. In summary, the method could be developed on one single chip for detecting multiple contaminants in actual samples.
Photogenerated lectin sensors produced by thiol-ene/yne photo-click chemistry in aqueous solution
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Oscar Norberg, Irene H. Lee, Teodor Aastrup, Mingdi Yan, Olof Ramström
The photoinitiated radical reactions between thiols and alkenes/alkynes (thiol-ene and thiol-yne chemistry) have been applied to a functionalization methodology to produce carbohydrate-presenting surfaces for analyses of biomolecular interactions. Polymer-coated quartz surfaces were functionalized with alkenes or alkynes in a straightforward photochemical procedure utilizing perfluorophenylazide (PFPA) chemistry. The alkene/alkyne surfaces were subsequently allowed to react with carbohydrate thiols in water under UV-irradiation. The reaction can be carried out in a drop of water directly on the surface without photoinitiator, and any disulfide side products were easily washed away after the functionalization process. The resulting carbohydrate-presenting surfaces were evaluated in real-time studies of protein–carbohydrate interactions using a quartz crystal microbalance (QCM) flow-through system with recurring injections of selected lectins, with intermediate regeneration steps using low pH buffer. The resulting methodology proved fast, efficient and scalable to high-throughput analysis formats, and the produced surfaces showed significant protein binding with expected selectivities of the lectins used in the study.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Oscar Norberg, Irene H. Lee, Teodor Aastrup, Mingdi Yan, Olof Ramström
The photoinitiated radical reactions between thiols and alkenes/alkynes (thiol-ene and thiol-yne chemistry) have been applied to a functionalization methodology to produce carbohydrate-presenting surfaces for analyses of biomolecular interactions. Polymer-coated quartz surfaces were functionalized with alkenes or alkynes in a straightforward photochemical procedure utilizing perfluorophenylazide (PFPA) chemistry. The alkene/alkyne surfaces were subsequently allowed to react with carbohydrate thiols in water under UV-irradiation. The reaction can be carried out in a drop of water directly on the surface without photoinitiator, and any disulfide side products were easily washed away after the functionalization process. The resulting carbohydrate-presenting surfaces were evaluated in real-time studies of protein–carbohydrate interactions using a quartz crystal microbalance (QCM) flow-through system with recurring injections of selected lectins, with intermediate regeneration steps using low pH buffer. The resulting methodology proved fast, efficient and scalable to high-throughput analysis formats, and the produced surfaces showed significant protein binding with expected selectivities of the lectins used in the study.
Electrochemical detection of dopamine using porphyrin-functionalized graphene
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Li Wu, Lingyan Feng, Jinsong Ren, Xiaogang Qu
A new type of porphyrin-functionalized graphene was synthesized and used for highly selective and sensitive detection of dopamine (DA). The aromatic π–π stacking and electrostatic attraction between positively-charged dopamine and negatively-charged porphyrin-modified graphene can accelerate the electron transfer whereas weakening ascorbic acid (AA) and uric acid (UA) oxidation on the porphyrin-functionalized graphene-modified electrode. Differential pulse voltammetry was used for electrochemical detection, the separation of the oxidation peak potentials for AA-DA, DA-UA and UA-AA is about 188mV, 144mV and 332mV, which allows selectively determining DA. The detection limit of DA can be as low as 0.01μM. More importantly, the sensor we presented can detect DA in the presence of large excess of ascorbic acid and uric acid. With good sensitivity and selectivity, the present method was applied to the determination of DA in real hydrochloride injection sample, human urine and serum samples, respectively, and the results was satisfactory.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Li Wu, Lingyan Feng, Jinsong Ren, Xiaogang Qu
A new type of porphyrin-functionalized graphene was synthesized and used for highly selective and sensitive detection of dopamine (DA). The aromatic π–π stacking and electrostatic attraction between positively-charged dopamine and negatively-charged porphyrin-modified graphene can accelerate the electron transfer whereas weakening ascorbic acid (AA) and uric acid (UA) oxidation on the porphyrin-functionalized graphene-modified electrode. Differential pulse voltammetry was used for electrochemical detection, the separation of the oxidation peak potentials for AA-DA, DA-UA and UA-AA is about 188mV, 144mV and 332mV, which allows selectively determining DA. The detection limit of DA can be as low as 0.01μM. More importantly, the sensor we presented can detect DA in the presence of large excess of ascorbic acid and uric acid. With good sensitivity and selectivity, the present method was applied to the determination of DA in real hydrochloride injection sample, human urine and serum samples, respectively, and the results was satisfactory.
Electric impedance sensing in cell-substrates for rapid and selective multipotential differentiation capacity monitoring of human mesenchymal stem cells
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Stephan Reitinger, Jürgen Wissenwasser, Werner Kapferer, Rudolf Heer, Günter Lepperdinger
Biosensor systems which enable impedance measurements on adherent cell layers under label-free conditions are considered powerful tools for monitoring specific biological characteristics. A radio frequency identification-based sensor platform was adopted to characterize cultivation and differentiation of human bone marrow-derived multipotent stem cells (bmMSC) over periods of up to several days and weeks. Electric cell-substrate impedance sensing was achieved through fabrication of sensitive elements onto glass substrates which comprised two comb-shaped interdigitated gold electrodes covering an area of 1.8mm×2mm. The sensing systems were placed into the wells of a 6-well tissue culture plate, stacked onto a reader unit and could thus be handled and operated under sterile conditions. Continuous measurements were carried out with a sinusoidal voltage of 35mV at a frequency of 10kHz. After seeding of human bmMSC, this sensor was able to trace significant impedance changes contingent upon cell spreading and adhesion. The re-usable system was further proven suitable for live examination of cell-substrate attachment or continuous cell monitoring up to several weeks. Induction of either osteogenic or adipogenic differentiation could be validated in bmMSC cultures within a few days, in contrast to state-of-the-art protocols, which require several weeks of cultivation time. In the context of medical cell production in a GMP-compliant process, the here presented interdigitated electric microsensor technology allows the documentation of MSC quality in a fast, efficient and reliable fashion.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Stephan Reitinger, Jürgen Wissenwasser, Werner Kapferer, Rudolf Heer, Günter Lepperdinger
Biosensor systems which enable impedance measurements on adherent cell layers under label-free conditions are considered powerful tools for monitoring specific biological characteristics. A radio frequency identification-based sensor platform was adopted to characterize cultivation and differentiation of human bone marrow-derived multipotent stem cells (bmMSC) over periods of up to several days and weeks. Electric cell-substrate impedance sensing was achieved through fabrication of sensitive elements onto glass substrates which comprised two comb-shaped interdigitated gold electrodes covering an area of 1.8mm×2mm. The sensing systems were placed into the wells of a 6-well tissue culture plate, stacked onto a reader unit and could thus be handled and operated under sterile conditions. Continuous measurements were carried out with a sinusoidal voltage of 35mV at a frequency of 10kHz. After seeding of human bmMSC, this sensor was able to trace significant impedance changes contingent upon cell spreading and adhesion. The re-usable system was further proven suitable for live examination of cell-substrate attachment or continuous cell monitoring up to several weeks. Induction of either osteogenic or adipogenic differentiation could be validated in bmMSC cultures within a few days, in contrast to state-of-the-art protocols, which require several weeks of cultivation time. In the context of medical cell production in a GMP-compliant process, the here presented interdigitated electric microsensor technology allows the documentation of MSC quality in a fast, efficient and reliable fashion.
Simultaneous determination of ascorbic acid, dopamine and uric acid using high-performance screen-printed graphene electrode
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Jianfeng Ping, Jian Wu, Yixian Wang, Yibin Ying
A disposable and sensitive screen-printed electrode using an ink containing graphene was developed. This electrode combined the advantages of graphene and the disposable characteristic of electrode, which possessed wide potential window, low background current and fast electron transfer kinetics. Compared with the electrodes made from other inks, screen-printed graphene electrode (SPGNE) showed excellent electrocatalytic activity for the oxidation of ascorbic acid (AA), dopamine (DA), and uric acid (UA). Three well-defined sharp and fully resolved anodic peaks were found at the developed electrode. Differential pulse voltammetry was used to simultaneous determination of AA, DA, and UA in their ternary mixture. In the co-existence system of these three species, the linear response ranges for the determination of AA, DA, and UA were 4.0–4500μM, 0.5–2000μM, and 0.8–2500μM, respectively. The detection limits (S/N=3) were found to be 0.95μM, 0.12μM, and 0.20μM for the determination of AA, DA, and UA, respectively. Furthermore, the SPGNE displayed high reproducibility and stability for these species determination. The feasibility of the developed electrode for real sample analysis was investigated. Results showed that the SPGNE could be used as a sensitive and selective sensor for simultaneous determination of AA, DA, and UA in biological samples, which may provide a promising alternative in routine sensing applications.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Jianfeng Ping, Jian Wu, Yixian Wang, Yibin Ying
A disposable and sensitive screen-printed electrode using an ink containing graphene was developed. This electrode combined the advantages of graphene and the disposable characteristic of electrode, which possessed wide potential window, low background current and fast electron transfer kinetics. Compared with the electrodes made from other inks, screen-printed graphene electrode (SPGNE) showed excellent electrocatalytic activity for the oxidation of ascorbic acid (AA), dopamine (DA), and uric acid (UA). Three well-defined sharp and fully resolved anodic peaks were found at the developed electrode. Differential pulse voltammetry was used to simultaneous determination of AA, DA, and UA in their ternary mixture. In the co-existence system of these three species, the linear response ranges for the determination of AA, DA, and UA were 4.0–4500μM, 0.5–2000μM, and 0.8–2500μM, respectively. The detection limits (S/N=3) were found to be 0.95μM, 0.12μM, and 0.20μM for the determination of AA, DA, and UA, respectively. Furthermore, the SPGNE displayed high reproducibility and stability for these species determination. The feasibility of the developed electrode for real sample analysis was investigated. Results showed that the SPGNE could be used as a sensitive and selective sensor for simultaneous determination of AA, DA, and UA in biological samples, which may provide a promising alternative in routine sensing applications.
A biofilm reactor-based approach for rapid on-line determination of biodegradable organic pollutants
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Changyu Liu, Huijun Zhao, Lijie Zhong, Chang Liu, Jianbo Jia, Xiaolong Xu, Ling Liu, Shaojun Dong
A new analytical approach utilizing a biofilm reactor (BFR) for rapid online determination of biochemical oxygen demand (BOD) was proposed and experimentally validated. The BFR was fabricated via a cultivation process using naturally occurring microbial seeds from locally collected wastewaters. The resultant BFR displays a remarkable rate of biodegradation towards a wide spectrum of organic substrates, capable of degrading over 20% of biodegradable organic substrates within 100s. More importantly, the BFR exhibits a superior indiscriminative biodegradation feature, enabling a precise prediction of BOD values of total biodegradable organics based on experimentally determined BOD values from partial degradation processes without a need for on-going calibration. The proposed approach was systematically validated using a range of individual organic substrates, their mixtures, synthetic samples and wastewaters. Highly significant linear correlations between the BFR and the standard BOD5 methods were obtained from diversified synthetic samples (r =0.988, p =0.000, n =45) and wastewaters (r =0.983, p =0.000, n =40). Near unity slope values of the principal axis of the correlation ellipse were obtained from all tested samples, suggesting both methods were essentially measuring the same BOD value. The reported method could be a useful online monitoring tool for determination of biodegradable organic pollutants.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Changyu Liu, Huijun Zhao, Lijie Zhong, Chang Liu, Jianbo Jia, Xiaolong Xu, Ling Liu, Shaojun Dong
A new analytical approach utilizing a biofilm reactor (BFR) for rapid online determination of biochemical oxygen demand (BOD) was proposed and experimentally validated. The BFR was fabricated via a cultivation process using naturally occurring microbial seeds from locally collected wastewaters. The resultant BFR displays a remarkable rate of biodegradation towards a wide spectrum of organic substrates, capable of degrading over 20% of biodegradable organic substrates within 100s. More importantly, the BFR exhibits a superior indiscriminative biodegradation feature, enabling a precise prediction of BOD values of total biodegradable organics based on experimentally determined BOD values from partial degradation processes without a need for on-going calibration. The proposed approach was systematically validated using a range of individual organic substrates, their mixtures, synthetic samples and wastewaters. Highly significant linear correlations between the BFR and the standard BOD5 methods were obtained from diversified synthetic samples (r =0.988, p =0.000, n =45) and wastewaters (r =0.983, p =0.000, n =40). Near unity slope values of the principal axis of the correlation ellipse were obtained from all tested samples, suggesting both methods were essentially measuring the same BOD value. The reported method could be a useful online monitoring tool for determination of biodegradable organic pollutants.
An ultrasensitive fluorescent aptasensor for adenosine detection based on exonuclease III assisted signal amplification
19 March 2012, 09:41:46
Publication year: 2012
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Peng Hu, Chengzhou Zhu, Lihua Jin, Shaojun Dong
We report here a graphene oxide (GO)-based fluorescent aptasensor for adenosine detection by employing exonuclease III (Exo III) as a signal amplifying element. In the absence of adenosine, the adenosine aptamers hybridized with the complementary DNA (cDNA), and the Exo III could not cleave the single-strand signal probes labeled with carboxylfluorescein (FAM) at its 5′ ends. When the graphene oxide was finally added, it could strongly adsorb the single-strand signal probes and quenched the fluorophore effectively. In the presence of adenosine, the aptamers associated with the targets, which led to the formation of duplex DNAs between the cDNAs and the signal probes. The Exo III thereafter could digest the duplex DNAs from 3′ blunt terminus of signal probes, liberating the fluorophore. Upon adding the GO, the fluorophore could not be adsorbed and quenched. By coupling cyclic enzymatic cleavage, a remarkable fluorescent increase was obtained. Due to the specific recognition ability of the aptamer for the target and the powerful quenching property of GO for signal probe, this proposed approach has a good selectivity and high sensitivity for adenosine. In the optimum conditions described, >100% signal enhancement was achieved and a limit of detection as low as 1nM was obtained, which is lower than those of commonly used fluorescent aptamer sensors. Moreover, the biosensor exhibited an ultrahigh sensitivity and held a versatile platform for clinical diagnostics, molecular biology and drug developments.
Source:Biosensors and Bioelectronics, Volume 34, Issue 1
Peng Hu, Chengzhou Zhu, Lihua Jin, Shaojun Dong
We report here a graphene oxide (GO)-based fluorescent aptasensor for adenosine detection by employing exonuclease III (Exo III) as a signal amplifying element. In the absence of adenosine, the adenosine aptamers hybridized with the complementary DNA (cDNA), and the Exo III could not cleave the single-strand signal probes labeled with carboxylfluorescein (FAM) at its 5′ ends. When the graphene oxide was finally added, it could strongly adsorb the single-strand signal probes and quenched the fluorophore effectively. In the presence of adenosine, the aptamers associated with the targets, which led to the formation of duplex DNAs between the cDNAs and the signal probes. The Exo III thereafter could digest the duplex DNAs from 3′ blunt terminus of signal probes, liberating the fluorophore. Upon adding the GO, the fluorophore could not be adsorbed and quenched. By coupling cyclic enzymatic cleavage, a remarkable fluorescent increase was obtained. Due to the specific recognition ability of the aptamer for the target and the powerful quenching property of GO for signal probe, this proposed approach has a good selectivity and high sensitivity for adenosine. In the optimum conditions described, >100% signal enhancement was achieved and a limit of detection as low as 1nM was obtained, which is lower than those of commonly used fluorescent aptamer sensors. Moreover, the biosensor exhibited an ultrahigh sensitivity and held a versatile platform for clinical diagnostics, molecular biology and drug developments.
No comments:
Post a Comment